Ngā Clamps Fence Rangitahi: Kei te pare i tō taiapa e whakahaere ana

Temporary Fence Clamps are manufactured to the highest standards, fully hot-dip galvanized, or Hot-dipped Rolled Galvanized Plates and tested to withstand extremely high pressures. Fence Clamps are an essential part of maintaining the structural integrity of the fence run. Using cheap or imitation fence clamps can cause damage to fence runs or create unsecure gaps in the structure that could allow access to unauthorized individuals to the work area.

To install Australian temporary fence clamps with temporary fence panels, follow these steps:

1. Site Preparation: Clear the area where you intend to install the fence. Ensure that the ground is level and free of debris.
2. Setting Up Metal Bases: Position metal bases along the line where the fence will be erected. These bases provide stability and support for the fence panels.
3. Installing Fence Panels:
   • Place the first panel into a metal base ensuring it’s upright and stable.
   • Secure the panel to the base using fence clamps to prevent movement.
   • Align the next panel close to the first and connect them at the top and bottom using fence clamps or hinges, ensuring a tight fit.
   • Continue this process until the entire area is enclosed.
4. Adding Gates: If gates are needed, install them by attaching hinges to the adjoining panels, ensuring they open and close smoothly.
5. Maintenance Tips:
   • Regularly inspect the panels and bases for stability and signs of wear.
   • Immediately address any issues such as loose clamps or hinges.
   • Keep the fence clean and apply rust-preventative treatments if necessary.

Feature Temporary Fence Clamps

• Temporary Fence Clamps Designed for 25mm-60mm RHS tubes center distancing 50mm 75mm 90mm 100mm
• Hot dipped galvanized steel
• 0.30kiro -0.4kg each
• Complies with Australian Standards AS 4687-2007

We design and manufacture the highest quality temporary fence clamps for our product range of panels, barriers and stays. like all of the quality products in our product range, our fence clamps are:

• Hot dipped galvanized high-grade steel – Min 42 meroiti
• Designed to give a secure clamp to your fencing pipes
• Designed to withstand the harshest environments
• Easy to use with essential hand tools
• Able to hold secure under tremendous pressure
• Various size Temporary Fence Clamps to suit your pipe size

Why do you need a temporary fence clamp?

Our temporary fencing clamps are built with high specifications as our panels to ensure longevity.

• Temporary Fence Clamps can Avoid Any Further damage to temporary fence lines
• Allow unrestricted or unlawful access
• Safety risks in hazardous environments

Specification of Temporary Fencing Clamps

2”/50mmmm center distance
Tekau mā toru o ngā Topenga	Paerewa Ahuwhānui 3.75mm-4.00mm Wātea kua whakaritea ake
Mutu	I tohua te wera i roto i te puna kaukau konutea mōkito kua kotitia 42 ngā moroiti /300gram/SQM.
Bolts	Roa e wātea ana 100mm / 60mm/40mm me te 10mm me te 8.00mm puta atu i te rōrahi
Tute	15.9mm /17mm me ērā atu mea i te, e ai ki ngā kiritaki’ whakaritenga
Pōkai ana	Na te pōkai katoa i roto i ngā pepa i whakawātea te kāton
NGĀ WHAKAAHUA

3”/75mm center distance
Tekau mā toru o ngā Topenga	Paerewa Ahuwhānui 3.75mm-4.00mm Wātea kua whakaritea ake
Finish Temporary Fence Clamps	I tohua te wera i roto i te puna kaukau konutea mōkito kua kotitia 42 ngā moroiti /300gram/SQM.
Bolts	Roa e wātea ana 100mm / 60mm/40mm me te 10mm me te 8.00mm puta atu i te rōrahi
Tute	15.9mm /17mm me ērā atu mea i te, e ai ki ngā kiritaki’ whakaritenga
Pōkai ana	Na te pōkai katoa i roto i ngā pepa i whakawātea te kāton
NGĀ WHAKAAHUA

90mm/3.5″ center distance
Tekau mā toru o ngā Topenga	Paerewa Ahuwhānui 3.75mm-4.00mm Wātea kua whakaritea ake
Mutu	I tohua te wera i roto i te puna kaukau konutea mōkito kua kotitia 42 ngā moroiti /300gram/SQM.
Bolts	Roa e wātea ana 100mm / 60mm/40mm me te 10mm me te 8.00mm puta atu i te rōrahi
Nuts Temporary Fence Clamps	15.9mm /17mm me ērā atu mea i te, e ai ki ngā kiritaki’ whakaritenga
Pōkai ana	Na te pōkai katoa i roto i ngā pepa i whakawātea te kāton
NGĀ WHAKAAHUA

100mm /4″ center
Tekau mā toru o ngā Topenga	Paerewa Ahuwhānui 3.75mm-4.00mm Wātea kua whakaritea ake
Mutu	I tohua te wera i roto i te puna kaukau konutea mōkito kua kotitia 42 ngā moroiti /300gram/SQM.
Bolts	Roa e wātea ana 100mm / 60mm/40mm me te 10mm me te 8.00mm puta atu i te rōrahi
Tute	15.9mm /17mm me ērā atu mea i te, e ai ki ngā kiritaki’ whakaritenga
Pōkai ana	Na te pōkai katoa i roto i ngā pepa i whakawātea te kāton
NGĀ WHAKAAHUA

Temporary fence clamps play a crucial role in the construction and utility of temporary fencing systems. These clamps are essential for connecting and securing fence panels together, ensuring the entire barrier is stable and secure. Here are the key applications and benefits of using temporary fence clamps:

Ngā Taupānga:

• Ngā Pae Hanganga: Securely join fence panels to safeguard materials and the public.
• Event Management: Easily configure spaces for events, controlling crowd flow.
• Emergency and Disaster Zones: Quickly set up or remove fences in crisis situations for protection and guidance.
• Residential Projects: Secure sites during home renovations or constructions, protecting both property and passersby.

Benefits:

• Enhanced Stability and Security: Clamps strengthen connections between panels, enhancing overall security.
• Durability: Made from galvanized steel, clamps resist rust and wear.
• Flexibility in Configuration: Clamps allow assembly in various layouts, adapting to different site needs.
• Ease of Installation: Simple design ensures quick, tool-free installation and removal.
• Utu-Utu: Reusable across multiple projects, reducing material costs.

These points encapsulate the practicality and efficiency of using temporary fence clamps in various scenarios.